Prior To Operation - EMAC Oleo-Mac PW 110C Manual De Instrucciones

15
16
GB
17
Before starting up your high pressure cleaner, we advise you to carefully read through this instruction manual. Follow
all instruction to minimize the risk of injuries when using the machine.
Before starting up the machine please check it carefully for any defects. If you find any, do not start up the machine
and contact your distributor.
Especially check
The insulation of the electric cable should be faultless and without any cracks. If the electric cable is damaged, it should
be replaced by an authorized distributor.
The following should be observed when connecting the high pressure cleaner to the electric installation:
• check before operation that the local power supply is the same as the specifications on the rating label;
• this machine is equipped with an universal motor with double insulation
connection;
• the electric installation shall be made by a certified electrician;
• it is strongly recommended that the power supply to the machine should include a residual current device (GFCI);
• product protection degree: IPX5.
GENERAL SAFETY REGULATIONS AND ACCIDENT PREVENTION
It is essential that you read the safety regulations and operating instructions in their entirety and follow the information
contained therein in order to eliminate the possibility of an accident or potentially dangerous situation from occurring
while working with the high pressure cleaner.
• This machine is not intended for use by persons (including children) with reduced physical, sensory or mental
14
14 13

PRIOR TO OPERATION

MAINS POWER SUPPLY CONNECTION
12 11
B
PREPARATION
9 8
10
A
1
C
: it is not necessary to have earth
7
6
5
4
3
2