Teac PD-H380 Manual Del Usuario página 7

A LINE OUT jack
This jack transmits an analog 2-channel audio signal. Connect
the components using RCA cables. Connect this jack to the CD
jack of the amplifier (A-H380) with an RCA cable.
Make sure to connect the cables as follows:
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
White (L)
Red (R)
< Be sure to insert each plug securely. To prevent hum and noise,
avoid bundling the signal interconnection cables together with
the AC power cord or speaker cables.
B DIGITAL OUT
Connect it to the digital input terminal of a digital device such
as a CD recorder, MD deck, etc. Use a commercially-available
optical digital cable.
< The optical terminal is covered by a shutter. Make sure that
the cable is firmly inserted, but do not force the cable when
connecting it or removing it, in order not to cause damage to
the unit.
C REMOTE CONTROL jacks
If you have TEAC A-H380, convenient system control operations
are available:
< When you press the PLAY button, the input selector of the A-
H380 is set to "CD" automatically.
< When the A-H380 is turned on during the input selector of the
A-H380 is set to "CD", playback of CD will start automatically.
Connect the REMOTE CONTROL jack (A or B) to the REMOTE
CONTROL jack of A-H380 with the provided remote control
connection cord.
D SELECTOR switch
If the REMOTE CONTROL jacks of this unit and the A-H380 are
connected with the remote control connection cord, selecct
"SYSTEM". You can use the remote control unit provided with
the A-H380, and convenient system control operations will be
available.
When you don't use the system control operations, or you don't
have an A-H380, select "SINGLE".
White (L)
Red (R)
E AC Power Cord
After all other connections are complete, connect the plug to
the AC wall socket.
< Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
< Hold the power plug when plugging or unplugging the power
cord.