GE IM-5A Manual Del Propietario E Instalación página 9

ICEMAKER INSTALLATION INSTRUCTIONS
SET POWER SWITCH TO OFF
4
Set the icemaker power switch to 0 (OFF).
the power switch in the 0 (OFF) position until the
refrigerator is connected to the water supply to
prevent premature operation.
Power switch
INSTALL THE ICEMAKER FILL CUP
5
Install the icemaker fill cup
as shown.
1
I
0
If the fill cup has been installed, go to the next
step.
Installation Instructions
Leave
I
0
(10) into the icemaker (1)
10
MOUNT THE ICEMAKER
6
Slide the icemaker onto the icemaker support,
and drive the screw
Make sure:
•
Icemaker slots fit in the support guides.
• The fill tube extends into the fill cup.
• The icemaker power switch is set to
Screw
8
Icemaker support
Icemaker slots
PLUG IN THE ICEMAKER
7
Insert the icemaker power cord plug
socket on the side wall, making sure the prongs and
holes are matched. Press the plug firmly into the
socket. Lock the plug in place by clipping the
restraints onto each side of the plug. Route the
icemaker power cord as shown to hide the cord
behind the icemaker
Socket
9
(CONT.)
(8).
0 (OFF).
into the