XP SA 125/00 E1 19-07-2000 10:11 Pagina 7
AC/DC ADAPTER (not included for SA 126 models)
1 Make sure the local voltage corresponds to the 4.5 V
adapter's voltage. The 1.3 mm centre pin (in the 4.5V DC
socket on the set) must connect to the positive pole + of
the supplied adapter with 3.5 mm socket.
2 Connect the adapter to the set's 4.5V DC socket and a wall
socket.
™
message may appear briefly on the display.
3 Always disconnect the adapter from the AC wall socket if
you are not using it.
USING YOUR SMARTMEDIA CARD
(See Fig. 1 on page 3)
You can store up to 120 minutes of music on the card, erasing
and overwriting as you want.
Make sure the set is off before inserting or removing the card.
• Insert a SmartMedia card into CARD INSERT with the
clipped corner of the card aligned as shown on the set.
Display shows:
™
– if your card is blank
™ card details if card already contains files.
™
– if format is incompatible with the set.
™
– the track is not an audio track or your card is
blank.
• Ejecting: Slide the CARD EJECT switch up and remove the
card.
7