CASUALPLAY playmoon Instrucciones De Uso página 12

Securing the Playmoon (illustrations 01 - 09)
• Fasten the rear seat safety belts (fig. 01).
• Place the Playmoon on the seat (fig. 02).
• Release the safety catch by pressing upwards (fig. 03).
• Open the cover of the clip downwards (fig. 04).
• Take the lap strap of one of the 3-point safety belts, located at the sides
of the rear seat and pass the strap behind the metal piece inside the clip.
Repeat the same operation for the belt on the other side (fig. 05).
• Make sure that the belts are tightened and well secured (fig. 06).
• Close the clips (fig. 07).
• Secure the baby with the carrycot's adjustable lap belt (fig.08-09).
Releasing the Playmoon (illustrations 10 - 13)
• Release the safety catch by pressing upwards (fig. 10).
• Open the cover of the clip downwards (fig. 11).
• Release the strap by pulling it upwards (fig. 12).
• Close the clips (fig. 13).
UNISYSTEM (illustrations 14 - 16)
• This exclusive fastener system means that the Playmoon can be used with
the following strollers: Vintage, Vintage 2, Vintage 3, Downtown, Jazz,
S4 and S4 Reverse.
fitting the Playmoon on the pushchair (illustrations 14-15)
• Put the parking brake on.
• Place the Playmoon on the pushchair facing backwards. Line the
UNISYSTEM connectors up with the slots. Press downwards until it clicks
indicating that it is fastened (fig.14), and a green signal appears in the side
window of the couplings (fig.15).
Removing the Playmoon (illustration 16)
• Press and then release the red button on both couplings (fig.16) (the red
signal will appear in the window) and pull upwards to release it from the
chassis.
Washing instructions
• The upholstery should be hand washed, using warm water and a mild
soap. Lacquered and plastic parts should be cleaned with a polisher free of
abrasives or solvents.
USER INSTRUCTIONS