GROLAB TANKBOT HW09 Manual De Instalación página 7

Place the module on a firm surface, far from
flood-prone areas. It is recommended that the
EN
module be mounted on a wall with the fixing
ES
holes on the upper part.
FR
Once the module has been mounted, connect
the power cable (17) to the module's power
supply input (9) and the transformer to a
110~ 230V outlet.
AC
8 9
17
With this connec on made your module is
powered and the LED indicator (13) should
start to blink. You also now have power availa-
ble on the Power output connector (1).
6