Get Started; After Treatment - Solio Alfa Instrucciones De Uso

6. Get started!

EN
To use Solio Alfa+, follow these steps:
1. Remove the device and other components from box.
2. Plug the adapter cable into the device socket and plug the adapter into an electrical
outlet.
3. Make sure your skin is clean and dry, then apply a thin layer of Slider Gel to the
treatment area.
4. Press the control button. All three indicator lights will go on, and your device is ready.
5. Adjust the treatment mode for the area you are treating (refer to section
5.2 Treatment modes).
6. Place the treatment surface on your skin, and move the device in a circular motion
across your skin for the recommended period (refer to section 5.4 Treatment Plan).

7. After treatment

When you have finished your treatment session:
1. To turn the device off, long press the control button.
2. Unplug the adapter from the electrical outlet.
3. We recommend you clean the treatment area to remove any residue of Slider Gel.
12