König CSBARSCAN10 Manual De Uso página 2

Installing the USB interface scanner
To install the USB interface scanner the host device should have a USB port to receive data
from the scanner. Follow the steps as listed below:
1) Make sure that the scanner has the right connector for the USB port of the host device.
2) Connect the cable to the USB port of the device.
3) If the LED indicator lights up and the buzzer sounds, the scanner is ready for use.
Configuration of the barcode scanner
Setup procedures
1) Locate a group that contains the parameters to be changed.
2) Scan the "Enter group #" label. The scanner will make a beeping sound to indicate that
setup is in progress.
3) Scan the label representing the parameter to be changed.
4) Scan the "Exit" to end the group currently selected, the scanner will beep.
5) Repeat the procedure for the other groups, including the parameters to be changed.
Example 1:
Set the operating mode to "Continuous mode".
1) Scan "Enter Group 5".
2) Scan "Continuous/Trigger off".
3) Scan "Exit".
Example 2:
Assign the preamble string as "#", and postamble string as "END"
1) Scan "Enter Group 6"
2) Scan preamble
3) Refer to ASCII TABLE (page 54) and find the code number in hex decimal: # ASCII =>
23 hex
The two digit numbers are: 2 3
4) Refer to Table-Hex: HEXADECIMAL (page 53) and scan the two digit labels accordingly.
5) Scan the "Confirm" label in Table-Hex
6) Scan "postamble"
7) Refer to the ASCII Table for the code numbers in hexadecimal (E => 45, N => 4E, D => 44)
8) Refer to Table-Hex: HEXADECIMAL (page 53) and scan the six digit labels consecutively.
4 5 4 E 4 4
9) Scan the "Confirm" Label in Table-Hex.
10) Go back to Group 6 and scan Exit.
Example 3:
Fixed Barcode Length Setting (i.e. Group 9-1 Interleaved 2 OF 5, Barcode Length= 15 digits):
1) Scan the Enter Group 9-1 Label
2) Scan the Length Define Label
3) Scan the Four Digit Labels in Table Hex (Page 53)
Tips:
• Refer to the Hexadecimal-Decimal Conversion Table (page 55) to get the barcode
length in Hexadecimal Number 15 dec => 0F hex
• The Four Digit numbers are: 0 F 0 F
2
ENGLISH