Connections - Hitachi AXM549BT Manual De Instrucciones

Connections

Caution: Make all connections before plugging the unit into the AC Power outlet.
Please read these additional installation notes before use.
If the following steps are not followed correctly the unit may become damaged.
Please note the correct steps for setting up the unit are as follows:
1. The speaker wires between CD player and speaker are to be connected first.
2. After the above cables are correctly connected, the AC power cord can then be connected
to power outlet.
Caution:
i) Reversing the steps by connecting the AC power cord first will cause malfunction of
the unit.
ii) During operation, if the control cable requires to be reconnected, the AC power
supply must be disconnected first. Otherwise, damage to the unit may be caused.
GB-13