Listening To Radio Broadcasts; Tuning In To A Station; Program Radio Stations; To Change The Fm Reception Mode - Hitachi AXM549BT Manual De Instrucciones

Listening to Radio Broadcasts

Caution: Before listening to the radio, please check that the FM Antenna is correctly connected
and adjusted for length and direction.

Tuning in to a Station

1. Repeatedly press the function select button (
function button ( ) on the remote control to select tuner source.
- The word "TUNER" will be displayed on the front panel.
2. Select a station using one of the following methods.
Auto Tuning

Press and hold the tuning backward/forward button (
forward button ( /
D
changes down or up automatically until a station is found.
 Manual Tuning
Repeatedly press the tuning backward/forward button (
ward/forward button (
the station you want.
 Preset Tuning (Available only after the stations are preset)
Repeatedly press the preset up/down button (
Its band and frequency are displayed on the front panel.

Program radio stations

You can program a maximum of 20 preset radio stations (FM).
 Automatically
Press and hold the programme button (
to activate automatic program mode.
- [AUTO] is displayed.
- All available stations are programmed.
- The first programmed radio station is broadcast automatically.
 Manually
1. Tune to a radio station.
2. Press the programme button (
- The preset number will blink.
3. Press the / button to allocate a number to this radio station.
H G
Note: If you select more than 20, the preset number will be changed to "1" automatically.
4. Press the programme button (
5. Repeat above steps 1 to 4 for each station you want to store in memory with a preset
number.
Note: If the system is unplugged or if a power failure occurs, the preset stations will not be
erased.

To change the FM Reception Mode

Press the stereo/mono select button (
channel to receive the best FM reception mode.
FUNCTION
) on the remote control for one second or more, the frequency
C
/ ) on the remote control to change the frequency until you find
D C
) on the remote control for two second or more
PROG
) on the remote control to activate program mode.
PROG
) on the remote control again to store the station.
PROG
) on the remote control to select the Stereo or Mono
MODE
GB-17
) on the unit or directly press the tuner
/ ) on the unit or tuning backward/
L BF
/ ) on the unit or tuning back-
L BF
/ ) to select the desired preset number.
H G