Basic Playback; Listening To The Radio - Pioneer VSX-S500-K Manual De Instrucciones

 Basic playback
Here are the basic instructions for playing a source (such as a Blu-ray Disc) with your home theater system.
STANDBY/ON
1
ECO
D AUX A AUX S.RTRV
AUTO /
iPod USB NETWORK ADAPTER
DIRECT
3
ALC /
TUNER BD DVD
STANDARD
ADV
CD STB GAME
SURR
SOUND
RECEIVER
TV PORTABLE
WING
7
AUDIO DISP
SLEEP SP-AB DIMMER STATUS
TOP MENU
MENU TOOLS VOL
A
ENTER
iPod
CTRL
HOME MENU RETURN
PTY BAND MUTE
B
PRESET TUNE
RECEIVER
Playing iPod or USB device
1
Switch the TV input to the input that connects
this receiver.
2
Press iPod USB to select the iPod USB input.
PLEASE WAIT CONNECTING appears as this receiver
starts recognizing the iPod/iPhone or USB device
connected.
• Some of and buttons can be used for basic
A
B
playback of files stored on iPod/iPhone or USB
devices.
1
Switch on your system components and receiver.
Start by switching on the playback component (for example a Blu-ray Disc player), your TV and subwoofer (if you have
one), then the receiver (press  STANDBY/ON).
6
2
Switch the TV input to the input that connects this receiver.
For example, if you connected this receiver to the VIDEO jacks on your TV, make sure that the VIDEO input is now
selected.
3
Press input function buttons to select the input function you want to play.
• The input of the receiver will switch over, and you will be able to operate other components using the remote control.
• The input source can also be selected by using the front panel INPUT SELECTOR button. In this case, the remote
4
control won't switch operational modes.
4
Press AUTO/DIRECT to select 'AUTO SURR' and start playback of the source.
If you're playing a Dolby Digital or DTS surround sound Blu-ray/DVD disc, with a digital audio connection, you should
hear surround sound. If you're playing a stereo source or if the connection is an analog audio connection, you will only
hear sound from the front left/right speakers in the default listening mode.
ALC /
Listening in Standard surround sound
STANDARD
This receiver provide basic surround sound for stereo and multichannel sources.
ADV
Listening in Advanced surround sound
SURR
The Advanced surround effects can be used for a variety of additional surround sound effects.
5
SOUND
Listening in Sound Wing mode
WING
HVT speakers make it possible to enjoy a broader-ranging sound.
5
Use VOL +/– to adjust the volume level.
• Sound can be switched off by pressing MUTE button.
6
Enjoy a variety of sounds.
 Press ECO to select the Ecology mode. 
• Select the Ecology mode for Stereo (max. 2.1 ch) playback to enable the reduction of power consumption to a
maximum of half normal levels.
 Press S.RTRV to switch the Sound Retriever feature ON or OFF. 
• When audio data is removed during the compression process, sound quality often suffers from an uneven sound
image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to
compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after compression.
Other remote control functions
• Switch to one of the underlined devices to use the remote control to operate that device. To operate the receiver, first
press ), then press the appropriate button to operate.
(
RECEIVER 7
 Use 
buttons to adjust the settings of this receiver and operate other devices.
A
 Use 
buttons to operate other devices. Operations are still possible even after pressing
B

Listening to the radio

1
Press TUNER to select the tuner.
If necessary, press BAND to change the band (FM or
AM),
2

Press (or
TUNE+/–
• Press and hold TUNE+/– (or ) for about a
second. The receiver will start searching for the next
station.
If you're listening to an FM station but the reception
is weak, press BAND to select FM MONO and set the
receiver to the mono reception mode.
Saving station presets
If you often listen to a particular radio station, it's
convenient to have the receiver store the frequency for
easy recall whenever you want to listen to that station.
1
Press TOOLS while receiving a signal from the
station you want to store.
The preset number is blinking.
2
Press PRESET+/– (or ) to select the station
preset you want, then press ENTER.
The preset number stop blinking and the receiver stores
the station.
Listening to station presets
You will need to have some presets stored to do this.
 Press PRESET+/– (or ) to select the station 
t h i s .
preset you want.
Playback with NETWORK feature
This receiver is equipped with the LAN terminal and
you can enjoy the following features by connecting your
components to these terminals.
• Listening to Internet radio stations
• Playback the music files stored in PCs
) to tune to a station.
1
Switch the TV input to the input that connects
this receiver.
2
Press NETWORK to select the NETWORK input.
It may take several seconds for this receiver to access
the network. The Main Menu appears when the
NETWORK is selected as the input function.
3
Use
play back, and then press ENTER.
Select a category from the following list:
• Now Playing – Display the Current status and
station information.
• Internet Radio – Listening the SHOUTCast internet
radio via Network.
• Music Library – Playback the music files stored in
PCs.
• Favorites – Favorite songs currently being
registered.
4
Use  to select the folder, music fi les or
Internet radio station to play back, and then
press ENTER.
• Some of
playback of music files stored on components on
the network.
RECEIVER

to select the category you want to
and buttons can be used for basic
A B
© 2012 PIONEER CORPORATION.
All rights reserved.
button.
5
En