X-Rite i1 PRO Manual De Usuario página 27

To prepare your i1Pro device for a display measurement you need to mount the
i1Pro device on the display holder. Make sure your device is calibrated and the status
indicators are pulsating white before you mount it.
1. You can adjust the length of the counter weight of the display holder for the size
of your screen. The counter weight is equipped with hook-and-loop fasteners on
both ends which allow you to shorten and lengthen the display holder to the correct
length.
2. Mount the i1Pro measurement device on the display holder by inserting the
mounting connector on the display holder in the mounting interface at the rear of the
i1Pro device. Make sure that the nose of the i1Pro device seats firmly in the display
holder.
3. Fix the i1Pro measurement device in the middle of your screen.
4. Set the software for display measurement and start the measurement process in the
application. Status indicator lights switch off during measurement.
5. To remove the i1Pro device from the display holder, gently pull the mounting
connector with the display holder out of the mounting interface at the rear of the
i1Pro device.
EN
27