Cleaning After Each Use - Omron COMP Air XLT NE-C25 Manual De Instrucciones

CLEANING AFTER EACH USE

Following the cleaning instructions after each use will prevent any
remaining medication in the bottle from drying resulting in the device not
nebulizing effectively and will help prevent infections.
WARNING
Wash the nebulizer parts after each use. Dry the parts immediately after washing.
1. Remove the inhalation accessory (mouthpiece, mask, or nosepiece) from
the nebulizer kit.
2. Disconnect the air tubing from the nebulizer kit.
3. Gently twist the nebulizer kit counterclockwise and lift to separate the
nebulizer kit into two sections.
4. Remove the baffle from the bottom section of the nebulizer kit.
5. Discard remaining medication in the medication cup.
WARNING
Always dispose of any remaining medication in the medication cup after each
use. Use fresh medication each time you use the device.
6. Rinse all the parts of the nebulizer kit and the mouthpiece, nosepiece
or mask with hot tap water. You may also wash these parts in a
dishwasher. Remove the parts after the wash and rinse cycle is
completed. DO NOT wash the mask in a dishwasher.
CAUTION
Place the nebulizer pieces in a basket recommended for dishwasher use.
Place the basket on the top shelf to avoid any damage to the nebulizer kit.
7. Rinse the mask with hot tap water.
8. Hand dry or air dry in a clean environment using a soft, clean,
lint-free cloth.
9. Assemble the nebulizer kit and store the nebulizer kit in a dry,
sealed bag in the storage pocket of the carrying bag.
16