Safety Recommendations; Intended Use Of The Machine; Technical Specifications - MSW -MHB-450-780.1 Manual De Instrucciones

I. SAFETY RECOMMENDATIONS
The operation manual must be read carefully.
This machine conforms to CE declaration.
Attention! Make sure that third parties keep distance from the area.
Attention! Risk of accident
Caution! Risk of hand being squeezed!
Attention! Wear a protective helmet.
Attention! Wear protective footwear
Attention! Wear protective gloves.
PLEASE NOTE!
Drawings in this manual are for illustration purposes only and in some details it may differ from the actual
product. The original operation manual is in German. Other versions are translations from the original
(German).
1. Before commencing with the work, make sure to read carefully and understand this operation manual!
All safety recommendations must be followed in order to avoid damages as a result of improper use
of the equipment.
2. Keep the instructions for future reference. If the machine is to be handed over to a third party, this
operation manual must also be handed over with the device.
3. If the machine is operated contrary to its intended use or in case of improper handling of the machine,
the manufacturer's liability for possible damage is excluded.
4. The machine should only be operated by phisically fit persons who have read this operating manual.
5. The machine is not designed to be handled by persons (including children) with limited physical,
sensory and mental abilities, or by persons lacking appropriate experience and/or knowledge, unless
they are supervised by a person responsible for their safety or if they have received instructions on
how to operate the machine
II. SAFE OPERATION PRINCIPLES / WARNINGS
1. Read this operation manual and the safety instructions prior to each use of the machine.
2. Before each use, the machine must be checked for possible damages that can result in a failure. This
machine must not be operated if its parts are worn out or damaged in a way that prevents proper
operation.
3. If the machine has been overloaded or is subject to strong shock/vibrations, it must be inspected by a
qualified service technician before commencing any work on the machine.
4. This machine must not be operated if it is damaged, worn out or if it does not work properly. If such
condition occurs the machine must be handed over to an authorized service center for inspection and
repair.
5. Comprehensive periodic inspections of the machine must be carried out and worn/damaged parts
must be replaced.
6. Do not dismount or replace any parts of the machine.
7. Use only original replacement parts, as recommended by the manufacturer.
8. This machine may only be handled by persons properly trained in safety regulations and who are
physically able to operate the machine.
9. Do not overload the machine with a load exceeding the maximum admissible load.
10. Do not strike the lift or the load.
11. Third parties must be warned about operation of the machine and stay at a safe distance.
12. Do not lift people or animals using this machine.
8
13. Do not lift the load using the machine above people or animals.
14. Always pay attention to the load.
15. Do not leave a load unsupervised.
16. Never exceed the permissible lifting capacity.
17. Never store the machine with a payload attached.
18. Lift only one load at a time.
19. No modifications or alterations should be made to the machine
20. After completion of the operation, the machine must be secured against the unauthorized use.
21. The machine must be regularly inspected for damage and worn and torn parts must be replaced with
new ones by an authorized service.
22. If the load falls, there is a risk of death or injury.
23. If the lift table remains unused for a long periods of time, make sure it is clean and free from stains and
that the platform is in the lowest position. Avoid contact with moisture, wipe dry if needed and grease
all moving parts.
24. Always secure the load with a chain.
25. The device should only be used on a flat and level surface, with appropriate load bearing rating.
26. The load should always be balanced correctly. Follow the motorcycle manufacturer's instructions for
lifting points.
27. Do not move / transport the lift table with a load upon it! The lift table may be moved / transported
only without a load.
28. Keep limbs away from the operating area.
29. Do not modify the device. Do not operate the device if any parts are warped, damaged, cracked or if
other faults occur which may prevent safe operation.
30. Make sure bolts are securely tightened prior to use.
Failure to follow safety recommendations and instructions may result in serious injury or death!
III. INTENDED USE OF THE MACHINE
The motorcycle lift is designed for lifting motorcycles. Do not use the lift table for any other purpose.
The user is responsible for any damages resulting from a non-conform use of the device!
IV. TECHNICAL SPECIFICATIONS
Product name
Model
Art. No:
Maximum loading (kg)
Maximum height (cm)
Minimum height (cm)
Weight (kg)
Table size (cm)
Ramp size (cm)
Rev. 02.02.2017 Rev. 02.02.2017
Motorcycle lift
MSW-MHB-450-780.1 MSW-MHB-450-780.2 MSW-MHB-450-780.3
6318 6319 6320
450 450 450
78 78 78
18 18 18
120 138 140
206 x 55 220 x 68 220 x 68
60 x 55 60 x 68 60 x 68
9