Capturing Pictures - Silvercrest DV-5000HD Manual Del Usuario

Recording

Capturing Pictures

Open the display and then rotate it according to your needs.
Power the camcorder on. If the current mode is not set to photo
capturing, select it by using the mode selector button [12].
If necessary, use the zoom adjustment [9] to select a larger to smaller
scene area. Move the wheel upwards (T - Tele) to zoom in or move
the wheel downwards (W - Wide) to zoom out.
Press the shutter button [7] to capture a picture. During saving the
power indicator [8] will light red.
The photo taken will be shown on the display for a few seconds. Then
the device returns to capture mode and the power indicator turns
green again.
In photo mode, different icons may appear on the display informing you
about the current settings.
124 - English
DV-5000HD