iTronics IT-01 Instrucciones De Servicio página 4

Protect the product from the effects of the elements. Do not set it up outdoors.
Only ever place the product on flat surfaces. If placed on an inclined surface,
water from the water tank may enter into the housing.
Make sure that the air inlet openings on the base of the product are knot
covered or sealed.
EN
Aroma Diffuser Features
The aroma diffuser is a modern fragrance diffuser which uses ultrasound
technology to generate a fine mist and thus distribute the fragrance
throughout the whole room. The aroma diffuser has the following functions:
Mist
Press " " button.
* Press once: turns green indicator on, which is intermittent mist (mist every
30 seconds and pauses for 30 seconds).
* Press again: turns to blue indicator, and changes to continuous mist model.
* Press third time: power off.
Timer
1. First, choose your mist type between continuous mist (blue) or intermittent
mist (green) mode. Then press the Timer button repeatedly to set the desired
runtime.
2. The timer options are:
* Press once: 1-hour count down timer is set and corresponding LED(1H) will light
up.
* Press again: 2-hour count down timer is set and corresponding LED
light up.
* Press third time: 3-hour count down timer is set and corresponding LED
will light up.
* Press fourth time: 4-hour count down timer is set and corresponding LED
will light up.
* Press fifth time: turns count down timer off.
You can also turn on the timer by pressing the timer button first. By doing this,
(2H)
-6-
the mist will only disperse in continuous mode. If you wish to set intermittent
mist mode, you must do so by pressing the mist button first and selecting
intermittent mist mode.
Note: Light and Timer function can be used at the same time.
LED Light
* Press the LIGHT button once to automatically cycle through the different colors.
* Press again to stay on the current color.
* Press the LIGHT button repeatedly to select the desired color.
* Press and hold the LIGHT button for 3 seconds to turn off the light.
Note: Light and mist function can be used at the same time.
Operation
1. Remove top cover (dia. 2).
2. Fill with distilled water to the maximum mark (120 ml) (dia. 3)
3. Add 2 -3 drops fragrance oil (dia. 4).
4. Replace top cover while ensuring perfect fit (dia. 6).
NOTE: The top cover
inner and outer cover have been assembled together at our manufacturing facility
but it's possible, the inner cover has detached from the outer cover. If so, please
insert the inner cover back into the outer cover firmly
top half of the device back on the diffuser base. Otherwise, the diffuser will not
operate as intended.
5. Connect power supply unit (dia.7).
6. Place on a level surface (dia.8).
7. Switch on: Press "
will
(3H)
(4H)
of the device consists of an inner cover and outer cover. The
(dia. 5 )
" button (dia.9).
-7-
EN
before you place the