English - Dornbracht Touchfree Instrucciones De Uso

Commissioning
Once the system is connected to the power supply, it is operati-
onal. You hear a beep.
i
NOTICE!
Sensor frequency 5,785 – 5,815 MHz
Devices with the same frequency can interfere with each other's
functions.
Automatic system teach-in starts automatically during initial com-
missioning.
Automatic teach-in
The process lasts no more than 2 minutes
It adjusts the sensitivity of the sensor so that the sensor can not
be activated anymore by the water jet itself.
During teach-in, avoid making any movement within the detec-
tion range of the sensor.
If you hear two beeps, automatic teach-in has been successfully
completed.
Sequence
1 2 3 4
t Time
1 Power supply connection
2 Water ON
(You hear a beep.)
3 Water pipe bleeding
30 seconds
4 Water OFF
5 Pause
(water drains away)
30 seconds
5 6 7 8 9 10 11 12
6 – 11
Sensor teach-in
Water jet detection
6 Water ON
7 Water OFF
8 Water ON
9 Water OFF
10 Water ON
11 Water OFF
12 Teach-in ends
(You hear two beeps.)

English

Error signals during automatic teach-in
If the sensor does not detect the jet of water, automatic teach-in
is suspended. (You hear five beeps.) The system is now activated.
If the sensor does not detect the jet of water, this does not neces-
sarily mean that the system will not function properly. You must
now test whether the system is working and operating normally.
If this is not the case:
Check that the shut-off valves (angle valves) are open.
Check that the sensor is in the correct position.
The product will not work properly or at all if the sensor is covered
by conductive materials (metal, water, etc.), or if these are right
next to the sensor.
You will then be able to restart the automatic teach-in manually.
Manually starting automatic teach-in
Re-connect the system to the power supply.
The automatic teach-in can only be activated manually within the
first 20 seconds after the beep.
The "CLEANING STOP" dot of the Touchfree box is used for
input during commissioning.
3 sec
t
CLEANING STOP
Keep your finger on the "CLEANING STOP" dot of the Touchfree
box until the automatic teach-in begins. You hear a beep.
11