www.aeg.com
8
3.10 Positioning the sliding box
3.11 DYNAMICAIR
4. HELPFUL HINTS AND TIPS
4.1 Hints for energy saving
• Do not open the door frequently or
leave it open longer than absolutely
necessary.
• If the ambient temperature is high and
the Temperature Regulator is set to
low temperature and the appliance is
fully loaded, the compressor may run
continuously, causing frost or ice on
the evaporator. If this happens, set the
Temperature Regulator toward warm-
er settings to allow automatic defrost-
The sliding box can be placed at differ-
ent heights.
Do make these adjustments proceed as
follow:
1.
lift the shelf with the sliding box up-
wards and out of the holders in the
door
2.
remove the retaining bracket out of
the guide under the shelf
3.
Reverse the above operation to in-
sert the sliding box at a different
height.
The refrigerator compartment is equip-
ped with a device that allows for rapid
cooling of foods and more uniform tem-
perature in the compartment.
This device activates by itself when nee-
ded, for example for a quick tempera-
ture recovering after door opening or
when the ambient temperature is high.
Allows you to switch on the device man-
ually when needed (refer to "DYNAMI-
CAIR Function").
The DYNAMICAIR device stops when
the door is open and restarts immediate-
ly after the door closing.
ing and so a saving in electricity con-
sumption.
4.2 Hints for fresh food
refrigeration
To obtain the best performance:
• do not store warm food or evaporat-
ing liquids in the refrigerator
• do cover or wrap the food, particularly
if it has a strong flavour
• position food so that air can circulate
freely around it