TECshow ION 740z Manual De Usuario página 7

Replacement of the fuse
Need to replace with same type and rating, which
originally installed in the device.
• Step One: Unplug power cable from main
power.
• Step Two: Unscrew the fuse holder out of the
housing with a screwdriver.
4. INSTALLATION
• The device could be either put on a
solid and even Surface, or mounted
upside down or sideways like left
picture.
• The mounting place must be sufficient
stable and be able to support a weight
of 10 times of the unit's weight. When
the fixture is hanged, always addition-
ally secure the device with the safety
chain, fasten the safety rope at a suit-
able position so that the maximum fall
of the projector will be 20 cm.
• Step Three: Remove the broken fuse and re-
place with an exact same type of new fuse.
• Step Four: Insert the fuse holder back to the
housing and screw tight and reconnect power.
P. 7
| Tecshow ION 740z
English version