IR Setting
Memory
Lens
LCD Screen
PIR Sensitivity
PIR Distance
PIR Angle
Picture Size
Picture Format
Video Size
Video Format
Video Length
Multi-shot
Trigger Time
Trigger Interval
Capture Modes
Serial Number (camera ID)
Time Lapse
SD Card Cycle
SIM Card
Operation Power
Battery Type
External DC
Stand-by Current
Stand-by Time
Auto Power Off
Power Consumption
(Test condition: 9V power supply, PIR Auto Mode)
Power Off Voltage
Interface
Mounting
Operating Temperature
Storage Temperature
Operation Humidity
Waterproof Spec
Dimensions
Weight
Certification
Application
11.
Troubleshooting
11.1.
Photos do not capture subject of interest
− Check the PIR sensitivity parameter setting. For warm environmental conditions, set the sensor sensitivity to "High" and for cold
weather use, set the sensor sensitivity to "Low".
− Try to set your camera up in an area where no heat sources are in the camera's field of view.
− In some cases, setting the camera near water will make it take images with no subject in them. Try aiming the camera over ground.
PIE1023 - Indice A
Top: 28 IR LEDs – Foot: 30 IR LEDs
SD card (4GB to 32GB)
F=3.0; FOV=100°; Auto IR-Cut-Remove (at night)
Built-in 2.0" TFT colour screen, RGB, 262k
3 levels: High / Medium / Low
20 m (65 ft.)
80°
5MP (2560x1920), 8MP (3264x2448), 12MP (4032x3024)
JPEG
FHD (1920x1080) @ 30 FPS, HD (1280x720), VGA (640x480)
AVI
Programmable from 05 to 59 seconds
Programmable from 1 to 5 photos per trigger
0.4 second
4 – 7 seconds
Photo, Photo + Video, Video
Programmable
Programmable (ON / OFF)
Programmable (ON / OFF)
Support most 2G and 3G SIM cards
Battery: 9V - DC: 12V
12xAA
12V
0.135mA
8 months
In Setup mode, camera will automatically power off in 3 minutes if there is no keypad
touching.
IR LEDs OFF
Photo: 170mA – Video: 160mA
Max. Range: 1150mA / Balanced: 1250mA / Min. Blur: 1500mA
IR LEDs ON
Video: 900mA
Alkaline batteries: 6.3V / Ni-MH batteries: 6.0V / DC power: 6.8V
USB / SD card / DC port
Strap / Tripod
-25°C to +60°C
-30°C to +70°C
5% - 90%
IP66
148.25 x 117.37 x 78.25 mm
367g
CE – FCC – RoHS
Android / iOS – Application's name: PIE1023
The PIE1023 camera trap can be remotely configured and triggered via the free mobile
application.
20/56