Vario-Ax; Tires - Invacare KÜSCHALL ADVANCE Manual Del Usuario

3.12 Vario-Ax

Your wheelchair can be fitted with a Vario-Ax. The Vario-Ax
makes it possible to change the wheel camber.
Adjusting wheel camber of the Vario-Ax
IMPORTANT!
– Do not overtighten the knurled screw A as this
can damage its mechanism.
IMPORTANT!
– Changing the wheel camber can impair or
negate the function of the parking brakes.
1. Loosen the knurled screw A on the Vario-Ax.
2. Pull the wheel by the hub B until the desired angle is set.
3. A gentle engagement will indicate when it has reached one
of the four possible positions.
1583547-A
4. Retighten the knurled screw A.
5. Perform the same setting on both sides.

3.13 Tires

The ideal pressure depends on the tire type:
The table below is an indication. In case the tire differs from the
list below, check the side of the tire, the maximum pressure is
often listed there.
Tire
Light wheel 7 bar
Profile tire 7 bar
Schwalbe® Marathon 10 bar
Plus tire
Schwalbe® One 10 bar
Schwalbe® Rightrun, 10 bar
blue
-
Solid tire, profile, grey
-
Solid tire (KIK type),
black
-
Solid, light wheel
The compatibility of the tires listed above depends on the
configuration and/or model of your wheelchair.
Components and their functions
Max. pressure
700 kPa 101 psi
700 kPa 101 psi
1000 kPa 145 psi
1000 kPa 145 psi
1000 kPa 145 psi
- -
- -
- -
19