Installation And Connections; Installation - TAD M4300 Manual Del Propietário

INSTALLATION AND CONNECTIONS

Installation

WARNING
As the unit is a large and heavy unit, make sure to move, unpack and install with two or more people.
'
When installing, choose a level and flat surface that can sufficiently withstand the weight of this unit. Failure to do so
'
could cause the unit to fall, resulting in an accident.
It is recommended that the unit be installed directly on a solid floor surface. If installed on a shelf, the user is responsible
for confirming that the location is fully able to support the heavy weight of the amplifier.
To promote heat-emission, do not put objects on top of this unit or cover with a sheet (such as cloth or curtains) while
'
operating. Failure to do so could cause the unit to malfunction through abnormal heating.
This amplifier rests on three large main legs and two auxiliary legs. The two auxiliary legs are provided to prevent the unit
'
from suddenly striking the floor in the event that sudden weight is placed on the unit, but they do not contact the floor
under normal conditions.
CAUTION
As the unit emits a large amount of heat, do not place this unit on top of soft surfaces (such as carpeting or cushions) or
'
in small spaces.
10
Leave 60 cm (2 ft.) open