Connecting The Power Cord - TAD M4300 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 66

Connecting the power cord

Once all connections have been made, connect the power cord to an AC power outlet (U.S. model: AC 120 V; all other
models: AC 220 V to 230 V).
Although the power cord to the unit is removable, do not attempt to use a power cord other than
the supplied cord.
When the power plug is connected to an AC power outlet, the unit's power indicator will light red. When the power switch
is set to ON, power is supplied to the unit. As the unit powers up, an 8-second muting period will occur, during which time
the power indicator will flash yellow. When the indicator lights steadily (yellow), the unit is ready for operation.
When not using the unit for a long period of time (due to travel or other reasons), be sure to unplug the power cord from
the power outlet.
Always turn the power switch off before unplugging the power cord to the unit.
How to connect the power cord
1.
Connect the supplied power cord to the AC IN connector of this unit.
2.
Connect to AC outlet (U.S. model: AC 120 V; all other models: AC 220 V to 230 V).
+
CAUTION
As the unit has high power consumption, be sure to connect the plug to a power outlet providing sufficient electrical
'
capacity. (Connecting to a power outlet with low electrical capacity could result in abnormal heating of the plug connection.)
Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when
'
your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other
object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cables. The
power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you
an electric shock. Check the power cord once in a while. If you find it damaged, ask your dealer for a replacement.
14
SPEAKER L
12V
TRIGGER
IN
ON
AUTO
POWER
OFF
DOWN
AC IN
Power cord (2-pin) (supplied)
Power outlet

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

M2500

Tabla de contenido