TFA 30.5021 Manual De Instrucciones página 6

TFA_No. 30.5021 Anleitung
STYLE
– Digital Thermo-Hygrometer
Housing
D: Wall mounting hole
E: Stand (removable)
F: Battery compartment
Getting started
• Remove the stand by carefully pulling it downwards.
• Open the battery compartment by turning the lid with a coin counter-
clockwise. Remove the insulation strip.
• Close the battery compartment again.
• All LCD segments will light up for about a few seconds.
• The unit is now ready to use.
• The upper display shows the time and the comfort level, the middle dis-
play shows the current temperature and the lower display the relative
humidity.
Setting of clock
• After battery was inserted or press and hold SET button for 3 seconds, you
will enter the time setting mode.
• The hour digit is flashing.
• Press SWITCH button to adjust the hours.
• Press SET button again and set minutes in the same way.
• Hold and press the button for a fast count.
• Press SET button to confirm it.
10
17.06.2010 10:57 Uhr Seite 6
STYLE
– Digital Thermo-Hygrometer
Temperature display
• Press SET button to change between °C (Celsius) or °F (Fahrenheit) as tem-
perature unit in normal mode.
• With Fahrenheit as temperature unit, the clock automatically switches to
the 12 HR system (PM appears on the display after noon).
MAX/MIN values
• Press MAX/MIN button.
• MAX appears on the display. The maximum temperature and humidity are
displayed.
• Press the button again.
• MIN appears on the display. The minimum temperature and humidity are
displayed.
• Press MAX/MIN button again to return to normal mode.
• Hold SET button in the respective mode to clear the recorded MAX/MIN
reading.
• --.- °C und --.- % appear on the display.
Comfort zone
• On the display appears a smiling face icon to indicate the comfort level of
indoor climate (humidity 40%...60%).
Display
• Using the SWITCH button, you can choose between the large-scale display
of temperature or humidity in normal mode.
11