Troubleshooting - Zibro A 20 Instrucciones De Uso

F. STORAGE
If the machine will not be used for a long period of time, take the following steps:
Remove the plug from the socket.
1
Clean the air filter.
2
Remove the HEPA filter (see chapter C).
3
Store the device in a dust-free location, preferably covered with a sheet of plastic.
4
G. TROUBLE SHOOTING
Check the following before contacting technical support:
Problem
The device does not work
The device does not
remove odours and/or
dust.
The device makes a
creaking sound.
No / insufficient air
circulation.
Cause
The plug is not in the socket.
The plug has been inserted into
the socket incorrectly.
A fuse has blown.
The HEPA filter is dirty.
The HEPA filter is missing.
The HEPA filter is not placed
correctly.
This noise is caused by small
particles of dust entering the
device and is normal.
The air flow is blocked.
Solution
Push the plug into the socket.
Push the plug into the socket
correctly
Replace the fuse.
Replace the filter
Insert the filter.
Place the filter in the correct
manner.
Contact your dealer if this noise is
constant.
Remove the blockage.
Replace the HEPA filter.
4
39