When Using Mac Os - Brother QL-500 Guia Del Usuario

20
Before using the printer

2. When using Mac OS

This section explains how to install P-touch Editor 5.0, Fonts, Auto Format Templates,
Clip Art, and the printer driver. After the driver is installed the driver configuration is
explained.
•
Until the driver installation is completed, do not connect the machine to your
Macintosh
connect it.
Below is the example for Mac OS
Read "XXX" as your printer name. The printer names in the following screens may differ
from your purchased printer name.
1
Start up your Macintosh
Double click the "QL_Series" (CD-ROM) icon.
2
Click [Mac OS X] folder and double click [QL-XXX Driver.pkg].
Follow the on-screen instructions.
3
After the installation is completed and
the screen shown below is displayed,
click [Close].
The installation of printer driver is completed.
Next, install the P-touch Editor 5.0.
4
Double click [P-touch Editor 5.0 Installer.mpkg] in [Mac OS X] folder.
The P-touch Editor 5.0 Installer starts up. Follow the on-screen instructions.
5
When the installation is completed and
the message "Click Restart to finish
installing the software" is displayed,
click [Restart].
The Macintosh
The installation of software is completed.
®
. Make sure the USB cable is not connected until you are instructed to
®
X 10.5.7. In the following steps, you will see QL-XXX.
®
, and insert the CD-ROM into the CD-ROM drive.
®
is restarted.
®