Fonexion ideus ITCOMBO100 Manual De Usuario página 46

ITCOMBO100 USER GUIDE
The destination handset will ring with its selected melody and display "BASE CALLING".
Answer the call by press DIAL or HANDSFREE key.
From Handset
Press INT key, you hear a constant tone in the earpiece and the handset will show "HS?", with
the numbers of other handsets you can call, and "0" for the base. Key in the number of other
handset or corded base using the handset numeric keys. If only one handset registered with a
base, just press INT to make an internal call.
The other handset (or the base) will ring and the display will show which handset is calling.
Answer the call.
The handset or base will stop ringing if it is not answered the intercom call within 30 seconds.
Call transfer
During a call, it's used for transferring the call by cordless handset or corded base.
Transfer the call by base unit
During an external call, if you want to transfer the call to a cordless handset, press the INT key.
The external call will be put on hold. If the base has only one cordless handset registered it will
immediately start calling that handset, but if more than one handset is registered, enter the
number for the handset you want to transfer the call to.
The destination handset will ring with the melody defined for an internal call.
Press the DIAL key or HANDSFREE key of the handset to answer the call. The two internal
phones will be connected. To complete the transfer of the call, the initiating base should be
hang-up and the external call will now be connected to the handset.
Transfer the call by handset
When you've made or answered an external call, to transfer it to another handset or to the base,
press the INT key. Key in the number of the handset or the base (the number of the base is "0")
you want to transfer the call to. If only one handset registered with a base, just press INT key.
The external call will be put on hold.
When the other handset or base answers, press INT key of the initiating handset to transfer the
external call to the other handset or base.
If the other handset or base does not answer, you can get back to the external call by pressing
key again or you will automatically be reconnected to the outside call after 30 seconds.
Conference call
To set up a three-way conference among the base, one handset and an external call (or two
handsets and an external call):
From Base
When you've made or answered an external call by the base unit, press INT key and enter the
number of the handset you want to connect by using the keypad. The display will show the
handset name you have entered and the handset will ring. (If only one handset registered with
a base, just press INT key)
Once the desired handset answers the call, press * (star) key on the base keypad, then the base
and the cordless handset will be connected to the external call.
When either the base or the handset hangs up, the other will still be connected to the external
call.
From Handset
Either make or answer an external call with one handset (e.g. HS1)
Press INT key, then key in the number of another handset (or key "0" for the base), and the
46
EN