Samsung DV231AE Serie Manual De Instrucciones página 23

Wrinkle Prevent
3
Selection Button
Dry Level
4
Selection Button
Temp Selection
5
Button
Time Selection
6
Button
Adjust Time
7
Start/Pause
8
selection button
Power button
9
DV231AEW-03064A_EN.indd Sec5:23 DV231AEW-03064A_EN.indd Sec5:23
Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling
in unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle
Prevent button to activate this feature.
The indicator light above the pad will illuminate when you select Wrinkle Prevent.
The load is dry and you can remove it at any time during the Wrinkle Prevent cycle.
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
press the Dry Level button. An indicator light will illuminate next to the desired
dryness level. Press the button repeatedly to scroll through the settings.
Larger or bulkier loads may require the Very Dry or More Dry setting for
complete dryness. Damp Dry is designed to partially dry items. Use for items
that lay fl at or hang to dry.
To select the correct temperature for a load, press the Temp button. An
indicator light will illuminate next to the desired temperature. Press the button
repeatedly to scroll through the settings.
High – For sturdy cottons or those labeled Tumble Dry.
Medium – For permanent press, synthetics, lightweight cottons, or items
labeled Tumble Dry Medium.
Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra Low – Provides the lowest heated dry temperature possible.
When using Manual Dry cycles, you can adjust the time by pressing the Time
Selection button.
During the Sensory Dry cycle, the time light indicator is off because exact
drying times are determined by fl uctuating humidity levels.
You can add time to the automatically set times in the Manual Dry cycles
(Time Dry, Quick Dry, Wrinkle Release, or Air Fluff).
If you press and hold the Adjust Time button, the time slowly increases until it
reaches the maximum time setting. When you set the time to the maximum,
and you briefl y press the button, the time returns to the lowest time setting.
After selecting a preset time using the Time button, you can adjust the
time using the Adjust Time button.
For example, press the Time button to select 40 minutes, and then
press the Adjust Time button to add 5 minutes.
Press to pause and restart programs.
Press once to turn your dryer on. Press again to turn it off. If you turn
your dryer on and do not touch any buttons for 10 minutes, the power
automatically turns off.
operating Instructions, tips _23
2011-04-11 2011-04-11 2:38:05 2:38:05