Assembly Instructions - Bradley BS1019 Manual Del Proprietário

How to assemble 5 Rack Bradley BS1019 (CE-EU) Professional Series smoker
Remove smoker from box.
Take all packaged parts out of smoker.
Remove all protective packaging materials from parts.
Set the smoker on firm base; stand or on table.
Open the cabinet door and remove all the internal protective packaging materials
Untie the plastic holding the grill racks from rack shelves.
Remove all the racks, trip tray, smoke cover, water bowl and rendering bowl to clean the cabinet from
remaining plastic residues.
Re-install all the components when plastic and packaging have been removed and cabinet has been
cleaned from the debris.
Handling of Packaging
All packaging should be discarded as per the regulations in your area.
Packaging box should not be used as a cover when smoker is in use.
Electrical Connection Set-Up in this order
1. Plug the supplied power cord to the back of the smoker socket (2).
2. Plug the other end of the power cord to the wall socket.
3. Turn on the main power switch (1).
This device complies with Industry Canada licence-exempt RRS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause, interference and (2) this
device must accept any interference, including interference that may cause undesired operation
of the device.

Assembly Instructions

TO ENSURE CONTINUED PROTECTION AGAINST RISK OF
ELECTRICAL SHOCK CONNECT TO PROPERLY GROUNDED
DISCONNECT FROM POWER OUTLET BEFORE CLEANING
CAUTION
OUTLET ONLY
CAUTION
OR SERVICING
DO NOT IMMERSE / DO NOT EXPOSE TO RAIN
10 | P a g e