Troubleshooting - Gima OXY-6 Manual De Uso Y Mantenimiento

Cleaning and Disinfecting Instruction
Surface-clean sensor with a soft cloth damped with a solution such as
75% isopropyl alcohol, if low-level disinfection is required, use a mild
bleach solution.
Then surface-clean by soft cloth damped ONLY with clean water and
let air dry or wipe it dry.
Caution: Do not sterilize by irradiation steam, or ethylene oxide.
Do not use the Pulse Oximeter if it is damaged visually.

8. TROUBLESHOOTING

Trouble
The SpO
2
and Pulse Rate
display instable.
The device
can not turn on.
The indicator
light is off
suddenly.
ENGLISH
Possible Reason
1. The finger is not
placed inside enough.
2. The finger is shaking
or the patient is moving
1. The batteries are
drained or almost
drained.
2. The batteries are not
inserted properly.
3. The device's
malfunction.
1. The device will power
off automatically when it
gets no signal for 8
seconds.
2. The batteries are
almost drained.
Solution
1. Place the finger
properly and try again.
2. Let the patient keep
calm.
1. Change batteries.
2. Reinstall batteries.
3. Please contact the
local service center.
1. Normal.
2. Change batteries.
26