Troubleshooting - Gima OXY-100 Guía De Uso

9 Troubleshooting

Trouble
Unstable SpO
2
Pulse Rate display
D e v i c e w i l l n o t
switch on
No Display
No Signal
ENGLISH
Possible Reason
and
1. The finger is not placed
far enough inside.
2. The finger is shaking or
the patient is moving.
1 . T h e b a t t e r i e s a r e
drained or almost drained.
2. The batteries are not
inserted properly.
3 . T h e
malfunctioning.
1. The device will power
off automatically when
there is no signal and no
operation for 1 minute.
2. The batteries are almost
drained.
1. Probe off or incorrect
connection
2. Incorrect finger insert
3. Probe is damaged
Solution
1 . P l a c e t h e f i n g e r
correctly inside and try
again.
2 . R e d u c e p a t i e n t
movement.
1. Change batteries.
2. Reinstall batteries.
3. Please contact the
local service center.
d e v i c e i s
1. Normal.
2. Change batteries.
1. Reconnect the probe
2. Reinsert the finger
3. Replace a new probe
40