"Ce" Conformity Declaration - Sima COBRA MKNO Manual De Instrucciones Original

ENGLISH

"CE" CONFORMITY DECLARATION

S I M A , S . A .
Polígono Industrial Juncaril, C/ Albuñol, Parcela 250 C. P. 18220 Albolote, Granada (ESPAÑA)
The company responsible for the manufacturing and set up of the following machine:
EXPANSION JOINT FLOOR SAW
DECLARATION:
That the aforementioned machine, for use in cutting expansion joints on concrete, asphalt and
other road surfaces, complies with all applicable CE directives (Directive 2006/42/CE) and
the corresponding Spanish laws..
The machine also complies with the following EU directives 2000/14/CE; 2002/44/CE;
2002/95/CE; 2002/96/CE
The machine also complies with the following directives
UNE-EN 292-1; UNE-EN 292-2; UNE-EN 294; UNE-EN 349; UNE-EN 500-1;
UNE-EN 13862:2002+A1=2009
UNE-EN 1050; UNE-EN 953
The licensed engineer responsible for the development of the machine
Eugenio Fernández Martín
Technical Supervisor
SIMA S.A.
Polígono Industrial Juncaril, C/ Albuñol, Parcela 250 - 18220 Albolote, Granada (ESPAÑA)
Albolote 26.09.2012
signed: Javier García Marina
Managing Director
3