Fixing - Key Automation TURBO 40 Manual De Instrucciones

Take the lid off unscrewing the
screws (fig.5).
Put the gear-motor on the plate.
Insert the two socket head screws (fig.6).
If the regulating allowed by the
rack is not sufficient, it is possible to
counterbalance the gear-motor high
working on the four screws (fig.7).

FIXING

fig.6
It is important to lock the two socket head
screws forcefully, making sure, that the gear-
motor is steady on the ground, during the whole
gate running.
17
fig.5
fig.7