Honeywell RTH3100C Guia De Instalacion página 22

Installation Guide
In case of difficulty
Make sure heating and cooling temperatures are set to acceptable ranges:
Temperature
settings do not
change
"Cool On" or
"Heat On" is
flashing
"Heat On" is not
displayed
"Cool On" is not
displayed
69-1891ES-1-RTH3100C-IG.CS5.indd 20
• Heat: 40° to 90°F (4.5° to 32°C).
• Cool: 50° to 99°F (10° to 37°C).
• Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor.
• Set the System switch to Heat, and set the temperature level above the
current room temperature.
• Set the System switch to Cool, and set the temperature level below the
current room temperature.
20
5/17/2011 11:21:10 AM