Publicidad
Idiomas disponibles
Idiomas disponibles
It is important to follow all instructions shipped with this product. This device is to be
installed by a trained electrician who is thoroughly familiar with the National Electric
Code/Canadian Electric Code and will follow the NEC/CEC Guidelines as well as local
codes.
The selection of mounting location for the device, its controls and the routing of the wiring
is to be accomplished under the direction of the facilities engineer and the safety engineer.
In addition, listed below are some other important safety instructions and precautions you
should follow:
• Read and understand all instructions before installing or operating this equipment.
• Disconnect light from the power supply before any installation or maintenance is
performed.
• After installation, test the light system to ensure that it is operating properly.
• After testing is complete, provide a copy of this instruction sheet to all operating
personnel.
• Establish a procedure to routinely check the light installation for integrity and proper
operation.
• The product nameplate, which may contain cautionary or other information of
importance to maintenance personnel, should not be obscured in any way.
Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death.
I. INSTALLATION
A. Unpacking
After unpacking the light, examine it for damage that may have occurred in
transit. If the equipment has been damaged, do not attempt to install or operate
it. File a claim immediately with the carrier stating the extent of the damage.
Carefully check all envelopes, shipping labels, and tags before removing or
destroying them.
B. Mounting
The Model AV1ST lights are designed for mounting on a flat horizontal surface, a
4" octagonal electrical box, or on a
can be accomplished using a separately purchased Model LWMB2 (wall mounting
bracket) or LCMB2 (corner mounting bracket) mounting kit. For weatherproof
installation, lights must be mounted vertically with the lens facing upwards.
1. Pipe Mounting
a. Attach light to pipe by turning clockwise.
INSTALLATION AND SERVICE INSTRUCTIONS
FOR MODEL AV1ST AUDIO VISUAL LIGHTS
SAFETY MESSAGE TO INSTALLERS,
USERS AND MAINTENANCE PERSONNEL
/
" NPT pipe. Mounting on a vertical surface
1
2
-1-
Publicidad
