Tabla de contenido
Publicidad
Como comenzar con WinPLC
WARNING
Thank you for purchasing automation equipment from Automationdirect.com™. We want your
new DirectLOGIC™ automation equipment to operate safely. Anyone who installs or uses this
equipment should read this publication (and any other relevant publications) before installing or
operating the equipment.
To minimize the risk of potential safety problems, you should follow all applicable local and
national codes that regulate the installation and operation of your equipment. These codes vary
from area to area and usually change with time. It is your responsibility to determine which codes
should be followed, and to verify that the equipment, installation, and operation is in compliance
with the latest revision of these codes.
At a minimum, you should follow all applicable sections of the National Fire Code, National
Electrical Code, and the codes of the National Electrical Manufacturer's Association (NEMA). There
may be local regulatory or government offices that can also help determine which codes and
standards are necessary for safe installation and operation.
Equipment damage or serious injury to personnel can result from the failure to follow all applicable
codes and standards. We do not guarantee the products described in this publication are suitable
for your particular application, nor do we assume any responsibility for your product design,
installation, or operation.
If you have any questions concerning the installation or operation of this equipment, or if you need
additional information, please call us at 770-844-4200.
This publication is based on information that was available at the time it was printed. At
Automationdirect.com E we constantly strive to improve our products and services, so we reserve
the right to make changes to the products and/or publications at any time without notice and
without any obligation. This publication may also discuss features that may not be available in
certain revisions of the product.
Trademarks
This publication may contain references to products produced and/or offered by other companies.
The product and company names may be trademarked and are the sole property of their respective
owners. Automationdirect.comE disclaims any proprietary interest in the marks and names of
others.
Copyright 2005, Automationdirect.com™ Incorporated
All Rights Reserved
No part of this manual shall be copied, reproduced, or transmitted in any way without the prior,
written consent of Automationdirect.com™ Incorporated. Automationdirect.com™ retains the
exclusive rights to all information included in this document.
1–1
Instalación y operación del WinPLC y del módulo H2-SERIO
Publicidad
Tabla de contenido
