To Add/Delete Channels; Clock Set Up - Sanyo DVW-7100A Manual De Instrucciones

H9680UD_EN/SP.qx3 04.8.10
To Select a Channel
You can select a channel by directly
entering channel using the Number but-
tons on the remote control.
Notes for using the Number buttons:
• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press 1,1,7)
• You must precede single-digit channel
numbers with a zero (For example:
02, 03, 04 and so on).

To Add/Delete Channels

1
1
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
• If the clock is not set, the
or
CLOCK SET screen
appears when you press
the MENU button. In this
case, press the MENU
button again.
2
2
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
or
3
3
MANUAL SET UP
CHANNEL 30
or
Select the channel to be
added or deleted.
4
4
MANUAL SET UP
CHANNEL 30
or
Select "ADD" or "DELETE".
5 5
To exit the
menu
4:26 PM Page 10
To Preset the Channel Again
1) Press the MENU button until the main
menu appears.
2) Select "CHANNEL SET UP" by pressing
the K or L button. Then, press the B but-
ton.
3) Select "AUTO SET UP" by pressing the
K or L button. Then, press the B button.
After scanning, the tuner stops on the low-
est memorized channel.
To Change the On-Screen Language
1) Press the MENU button until the main
menu appears.
2) Select "LANGUAGE SELECT" by press-
ing the K or L button. Then, press the B
- M E N U -
button.
3) Select "ENGLISH" , "FRANCAIS" or
"ESPAÑOL" by pressing the K or L but-
ton. Then, press the CLEAR/C.RESET
button.
Hint
Hint
• If you accidentally select Spanish or
French and need English: Press the
MENU button and choose SELEC.
IDIOMA, or SELECTION LANGUE. Press
the B button, and select ENGLISH. Finally,
press the CLEAR/C.RESET button.

Clock Set Up

VCR VCR VCR
1
1
MENU
or
(CATV)
ADD
2
2
or
(CATV)
DELETE
3
3
or
CLEAR
C.RESET
4
4
5
5
6
6
VCR
Press the VCR button first.
- M E N U -
7
7
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
• If the clock is not set, the
CLOCK SET screen
appears when you press
the MENU button. In this
case, go to step [2].
8
8
CLOCK SET
MONTH DAY YEAR
1 0 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
Hint
Hint
Select the current month.
• To go back one step, press the s button
• Your clock setting will be lost if either there
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 – – – –
HOUR MINUTE AM/PM
– – : – – – –
Select the current day.
– 10 –
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 2 0 0 4
or
HOUR MINUTE AM/PM
– – : – – – –
Select the current year.
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 FRI
or
HOUR MINUTE AM/PM
0 5 : – – – –
Select the current hour.
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 FRI 2 0 0 4
or
HOUR MINUTE AM/PM
0 5 : 4 0 – –
Select the current minute.
CLOCK SET
MONTH DAY YEAR
1 0 / 0 1 FRI
HOUR MINUTE AM/PM
or
0 5 : 4 0 P M AM
Select "AM" or "PM".
To exit the CLOCK SET
screen
(during the steps [2] to [7]).
is a power failure or this unit has been
unplugged for more than 30 seconds.
Need help? Call
1-800-813-3435
2 0 0 4
2 0 0 4
B PM
EN