Faber CHLOE Serie Instrucciones De Instalación página 11

6
Remove the 4 screws as shown and take off the cover plates.
Do not discard and set aside for future use.
8
Unscrew the 2 screws
(Posi-Drive) that hold
the blower and unlock it
from the initial position as
shown in Image a.
After removing blower
rotate as shown until it is
in the correct rear venting
position as shown in
Image b-c.
Use the two screws that
were removed to secure
the blower as shown in
Image d.
9
Fix the Recirculation Vent Grill with two screws.
7
image above, to disconnect the left and right Connectors from
the blower.
P1
2x
P
12e
11