Temporary Override; Child Lock; Temperature Unit; Setting Time - OJ Electronics UCG Guia De Inicio Rapido

Type UCG/UDG
Please note: This feature can be useful for instance if you are going on
holiday and want to maintain a frost protection temperature (e.g. 41°F)
while you are away.
To return to the automatic 4-event program, you must select Auto. Please
refer to page 2 for instructions.
MAN. MODE
MODE

Temporary Override

I want to temporarily set a comfort temperature for a single
event, e.g. because I am not at work one day and want to main-
tain a higher temperature or because I am having a party.
To do so, must use override mode:
1 With Active Display (backlight on) press OK to activate the menu.
2 Press the Up or Down buttons until the MODE option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until OVERRIDE flashes in the upper
part of the display.
5 Press the OK button. The temperature will begin to flash.
6 Press the Up or Down buttons until the required temperature flashes.
7 Press the OK button.
Please note: Override mode is a temporary temperature setting that
is cancelled automatically by the next event in the scheduled 4-event
program.
OVERRIDE
MODE

Child Lock

I want to lock the thermostat menus to prevent the settings from
being changed.
To do so, you must activate the child lock:
1 With Active Display (backlight on) press OK to activate the menu.
2 Press the Up or Down buttons until the SETTINGS option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until the CHILDLOCK option flashes.
A padlock symbol will appear in the menu area.
5 Press the OK button. OFF will flash in the upper part of the display.
6 Press the Up or Down buttons until ON flashes.
7 Press the OK button.
8 Follow the Exit Menu procedure to exit the menu.
To unlock the child lock again, proceed as follows:
1 With Active Display (backlight on) press OK to activate the menu.
2 Then press and hold the Up and Down buttons simultaneously for
three seconds.
4
Factory setting: OFF
SETTINGS

Temperature Unit

I want to change the temperature unit (
To do so, you must:
1 With Active Display (backlight on) press OK to activate the menu.
2 Press the Up or Down buttons until the SETTINGS option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until °C/°F flashes in the menu area.
The unit currently selected will appear in the upper part of the display.
5 Press the OK button.
6 Press the Up or Down buttons until the required unit °C/°F flashes.
7 Press the OK button.
8 Follow the Exit Menu procedure to exit the menu.
Please note: Temperatures are displayed in Celsius with a resolution of
0.5 degree and in Fahrenheit with a resolution of 1 degree.
Factory setting: Celsius
SETTINGS

Setting Time

I want to change the time.
To do so, you must:
1 With Active Display (backlight on) press OK to activate the menu.
2 Press the Up or Down buttons until the SETTINGS option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until the TIME option flashes.
5 Press the OK button.
6 Press the Up or Down buttons to select either 12 or 24 hour clock.
7 Press the OK button. The hour will begin flashing in the lower part of
the display.
8 Press the Up or Down buttons to set the hour.
9 Press the OK button. Now the minutes will flash.
10 Press the Up or Down buttons to set the minutes.
11 Press the OK button.
12 Follow the Exit Menu procedure to exit the menu.
© 2012 OJ Electronics A/S © 2012 OJ Electronics A/S
CHILDLOCK
°C/°F)
used in the display.
C°/F°
English