Class I electrical apparatus for high level installation (minimum installation height of 1.8m).
Read these instructions carefully before installing the apparatus.
The RMO electrical air heaters comply with European Safety Standard UNE EN 60335-2-30
The state and functioning of the equipment should be checked on unpacking. Any source defects are covered by the guarantee.
Electricfor, S.A. takes no responsibility for malfunction, faults, or accidents caused by incorrect use of the equipment, or by an installation, which does
not comply with these instructions.
Calorific
Output
power
Code
m³/h
KW
Kcal/h
RMO4
430
3,6
3100
RMO4A
430
3,6
3100
RMO6
690
6
5160
(*) RMOB6
690
6
5160
RMO9
875
9
7740
(*) RMOB9
875
9
7740
RMO13,5
1490
13,5
11610
(*) RMOB13,5
1490
13,5
11610
RMO18
1490
18
15480
(*) RMOB18
1490
18
15480
RMO13'5 AND RMO18 DESIGN FEATURES
1.-
Ventilation button and general switch.
2.-
Heating button.
3.-
Safety mechanism reset button.
4.-
Protective grille.
5.-
Stand.
6.-
Air heaterposition knob. 4 positions.
7.-
Input for room thermostat.
8.-
Connector cable input.
9.-
Connection panel.
10.-
Wall support kit (optional)
INSTALLATION MANUAL FOR
RMO/RMOB ELECTRICAL
Table I. Characteristics and technical specifications of the range.