Bushnell TROPHY CAM 119435 Manual De Instrucciones página 9

Parameter
Settings
(Bold=default)
Interval
10S (second)
default,
with a 60M
(minute) to1S
(second) range
of settings
available.
(60M-1M are set
in one minute
increments,
59S-1S are set
in one second
increments)
Sensor Normal, High,
Level Low
16
Description
Selects the length of time that the
camera will "wait" until it responds
to any additional triggers from the
PIR after an animal is first detected
and remains within the sensor's
range. During this user set "ignore
triggers" interval, the camera will
not capture photos/videos. This
prevents the card from filling up
with too many redundant images.
Settings begin with 10 second
default when parameter is first
selected. Note: after setting down
past "1S", settings start over at "60M".
Selects the sensitivity of the PIR
sensor. The "High" setting will
make the camera more sensitive
to infrared (heat) and more easily
triggered by motion, and the "Low"
setting makes it less sensitive to
heat and motion. The High setting
can be useful when the ambient
temperature is warm (making it
more difficult for the sensor to
detect animals), and the Low
setting may help in cold weather if
the camera is being triggered too
often by anything warmer than the
surroundings.
Parameter
Settings
(Bold=default)
Format Execute
(followed by an
additional No/
Yes step on color
viewer models
only)
TV Out NTSC, PAL
Time Stamp Off, On
(only affects
still photos)
Set Clock Set
Description
Deletes (erases) all files stored
on a card to prepare it for reuse.
Always format a card that has been
previously used in other devices.
Caution! Make sure you have
downloaded and backed up any
files you want to preserve first!
Press OK to execute (then select Yes
and press OK again on color viewer
models), press MENU (or select
NO then press OK) to exit without
formatting.
Selects video standard /format for
the "TV Out" output jack. The video
standard is NTSC for the United
States, Canada, Mexico, Asia and
South America. PAL is used primar-
ily in Europe.
Select "On" if you want the date &
time (that the photo was captured)
imprinted on every photo, select
"Off" for no imprint.
Press OK and use the UP/DOWN
keys (to change the setting) and
LEFT/RIGHT keys ( to move
to the next field) to set the hour
(24-hr format only, "00"=midnight,
"12"=noon) and minute, and then
(on the lower row), the year, month
and date.
17