Speedcook
power level
Speedcook
power level
tips
The Advantium uses power from high
intensity halogen lamps, a ceramic
heater, a convection system and
microwaves to cook food from the top,
bottom and interior simultaneously to
seal in moisture and flavor.
When using the pre-set menu foods,
the power levels are already selected
for you. However, power levels can
be adjusted when using pre-set menu
foods and CUSTOM SPEEDCOOK.
Each power level gives you halogen
lamp or ceramic heater power and
microwave energy for a certain
percentage of the time or provides
heating from the convection system.
For example:
U–07
Upper halogen lamp on
70% of the time.
L–07
Lower ceramic heater on
70% of the time.
C–06
Convection element heats oven
to 350ºF.
M–05
Microwave on 50% of the time.
NOTE: Be careful when adjusting
power levels so that you do not over- or
undercook food.
Follow these general guidelines when selecting the best U=, L=, M= and C=
settings for your favorite recipe:
U = Select a higher setting for thin
foods requiring a golden brown
top (example: fish fillets, toast,
boneless chicken breasts). Select
a lower setting for thicker foods
and foods with high sugar or fat
content (example: muffins, roasts,
casseroles) or that require a longer
cook time.
L = Select a higher setting for thick
or dense foods that may not cook
quickly in the center (example:
steaks, casseroles). Select a lower
setting for thin foods (example:
cookies).
Speedcooking
Built-In Advantium Oven
1. Press the SPEEDCOOK pad and
select your food (follow instructions
from Using the pre-set speedcook
menu).
2. When display shows ADJUST TIME
or START, press the POWER
LEVEL pad.
If you do not want to change one of
the settings, just press the dial to
move to the next selection.
3. Turn the dial clockwise to increase
or counterclockwise to decrease the
upper power level. Press the dial to
enter.
4. Turn the dial to change the lower
power level. Press the dial to enter.
5. Turn the dial to change the
microwave power level. Press the
dial to enter.
6. Turn the dial to change the
convection power level. Press the
dial to enter.
7. Press the START/PAUSE pad or the
selector dial to start cooking.
M = Select a higher setting to shorten
cooking time for dense or heavy
foods (example: casseroles, whole
chicken). Select a lower setting for
delicate foods (example: breads) or
foods requiring longer cook times
for tender results (example: stew,
pot roast).
C = Select a lower setting for more
delicate foods that cook at lower
temperatures. Select a higher
setting (6 or above) for more
robust foods or foods that cook at
temperatures above 350ºF.
15