Loading Your Trailer; Connecting The Travoy To Your Bike - Burley TRAVOY Manual De Instrucciones Y Seguridad Del Propietario

Loading Your Trailer

There are many different options to load your Travoy. Tie-down buttons are
provided in eight places on the outside of the frame. These are intended to
be used with swivel-lock buckles included on Travoy bags and accessories
(Figure 16). Tie-down straps are included with your trailer. Various additional
bags and accessories are available for different styles and functions.
Follow these guidelines when loading your Travoy:
1. Do not exceed a total load of 60 lbs (27 kg).
2. Do not exceed 20 lbs (9 kg) in the upper portion of the trailer (above the
middle frame hinge).
3. Do not exceed 40lbs (18kg) on the lower portion of the trailer (below the
middle frame hinge).
4. With the trailer loaded, the weight at the hitch coupling should be greater
than 2 lbs (1 kg) but not exceed 8 lbs (3.6 kg).
5. Secure your load such that nothing touches the wheels and no loose items
can fall out.
6. Ensure that your load is as centered on the trailer as possible in order to
increase the stability of the trailer.

Connecting the Travoy to Your Bike

1. Attach the trailer to the hitch by sliding the flex
connector onto the hitch pin (Figure 17). The latch will
close automatically when the flex connector is fully
seated.
2. To disconnect the trailer, push the latch toward the
seatpost and lift the flex connector off the hitch pin
(Figure 18). Hold your bike upright to make it easier
for the coupling to slide on and off the pin.
OWNER'S INSTRUCTION & SAFETY MANUAL
Figure 17
Figure 16
Figure 18
BURLEY.COM ENG
7