Operating Guide; Locate The Fence Transmitter - Petsafe PIG19 Manual De Funcionamiento Y De Adiestramiento

Operating Guide

STEP 1

Locate the Fence Transmitter

Place the Fence Transmitter:
• In a dry, well ventilated, protected area (1A, 1B).
• In an area where temperatures do not fall below freezing (e.g., garage, basement, shed).
• Secured to a stationary surface using the mounting hardware (not included). A mounting template is included in the back of
this guide.
• At least 1 m from large metal objects or appliances as these items may interfere with the signal consistency (1C).
Once you have mounted the Fence Transmitter, the Boundary Wire must exit the building. This can be accomplished via a
window or through a hole drilled through the wall. Ensure the drill path is clear of any utilities.
Make sure the Boundary Wire is not cut off or pinched by a window, door, or garage door, as this can damage it over time and
create a wire break. To prevent fires and electrical hazards, install the Fence Transmitter in buildings that are in accordance with
state and local electrical codes.
Risk of Electric Shock. Use the Fence Transmitter indoors in a dry location only.
1A 1B 1C
1 m
www.petsafe.net 7