Cleaning Gun Liner - Hobart Handler 125 EZ Manual De Operación

7-6. Cleaning Gun Liner

Head
1
Tube
2
3
8 mm
Remove nozzle. Cut off wire
at contact tip, and remove
contact tip and tip adapter.
+ −
Tools Needed:
8 mm
+ −
Open pressure assembly. Retract
wire from liner onto spool.
Lay gun cable out straight,
and blow out liner.
.
A complete Parts List is available at www.HobartWelder.com
!
Turn Off welding power source.
1 Nozzle
2 Contact Tip
3 Adapter
Remove screws (3) from
cover, and remove cover
from wire drive assembly.
.
Reassemble drive cover
Thread wire according to
and gun in reverse order
Section 5-8.
from taking it apart.
804 241-A / Ref. 804 123-A / 804 128-A / Ref. 803 837-A
.
Hold wire tightly to keep it
from unraveling. Secure
end of wire at spool.
+ −
OM-923 Page 23