Preliminary Steps & Filter Pump Important Notes & Filter Pump Power Information & Parts List 7 - Polygroup SUMMER WAVES SKIMMERPLUS SFS350 Manual Del Propietário

1. READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your SFS series Filter Pump.
2. Before you begin to assemble the pool, identify, count, and check all parts needed for assembly.
3. It is recommended that you have some PETROLEUM JELLY (not included) on hand for lubricating the gaskets.
1. Installer shall follow written instructions provided for operation of the filter pump systems.
2. All electrical components shall be installed in accordance with Article 680 of the National Electrical Code (NEC) "Swimming Pools, Fountains and Similar
Installations" or its latest approved edition.
3. The Filter Cartridge 3-3/4" (Type D) will hold as many as 2 of the 1" diameter chlorine tablets and the 8" (Type A/C) will hold as many as 6 of the 1" diameter
8
chlorine tablets. Check your chlorine levels to determine the proper number of chlorine tablets to add. The filter cartridge will automatically dispense chlorine into the
pool as the pump runs. You must have the type of Filter Cartridge
DO NOT use this to dispense powdered chlorine, shock treatment or any other type of chemicals as damage to the pump, filter cartridge, and pool will occur.
4. The SFS Series Filter Pump systems are manufactured by Polygroup
grounded - 120 Volts A.C. - 60 Hz. (ALL Units must have a minimum of 105 Volts A.C. to start and run properly.)
FILTER PUMP POWER INFORMATION
FILTER PUMP MODEL
SFS350 Filter System
SFS400 Filter System
ITEMS PARTS NAME
Pump Motor Assembly
1-5
Pump Mounting Screws
6
Filter Pump Skimmer Canister
7
Filter Cartridge
8
SFS Skimmer Strainer Basket
9
Skimmer Lock Top
10
O-ring for Hose Connections
11
12
13
Pool Wall Fitting
14
Fitting Gasket
15
Return Fitting Washer (RF Washer)
16
Return Fitting Lock Nut
17
18
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
PRELIMINARY STEPS
FILTER PUMP IMPORTANT NOTES
8
PARTS LIST
Return Hose
Hose Clamp
Elbow 90°
MST. Extended operating days and hours during peak season requirements.
with a central core mesh divider (See page 8) to use the chlorine dispenser.
and ETL control number 4000608 and 4006317 - double insulated and
®
WATTAGE
20 watts
25 watts
QTY. ITEMS
x1
19
x1
20
x1
21
x1
x1
22
x1
23
x2
24
x1
25
x2
26
x1
27
x1
28
x1
29
x1
GFCI Power Cord Set (image reference only)
30
x1
OWNER'S MANUAL
AMPERAGE
0.35amps
0.4amps
PARTS NAME
Return Fitting Diverter
Locking Ring
Faceplate Gasket
(One Spare Included)
Face Plate
Hex Head Screws
Weir Foam
Weir
Drain Cap
Drain Cap Seal Gasket
Service Plug
Pool Wall (image reference only)
QTY.
x1
x1
x1
x1
x1
x1
x1
x1
x1
x2
7