Publicidad
Idiomas disponibles
Idiomas disponibles
3. ATTACH MOWER
SIDE SUSPENSION
ARMS
(A} TO CHASSIS
- Position hole
in arm over pm (B) on outside of tractor
chassis
and secure with retainer spring.
4.
Repeat on opposrte
side of tractor.
ATTACH
REAR
LIFT LINKS
(C) - L_ft
rear corner of mower
and position
slot
in link assembly
over
pin (D) on rear
mower bracket and secure with washer
and retainer spring.
7. Insert
end of link (E) into hole in front
mower
bracket
(H) and
secure
with
washer
and retainer spring (J).
_:a;?_,
_,a__
-. i-_._
-_ ,
, -
-_ ->%;@,,-
8. Hook end of clutch cable spnng (Q) into
hole _n _dfer arm (R).
9. Push clutch cable housing guide (P) Into
bracket, slide collar (L) onto guide and
secure with retainer spring (K).
I 0, Install belt onto engine pulley (M) and belt
keepers (G),
6. ATTACH FRONT
LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly
through
front
hole In tractor
front suspension
bracket (F).
%
IMPORTANT:
Check belt for proper routing
=naf! mower pulley grooves.
11.Ra=se
attachment
lift lever
to h_ghest
position.
12. If necessary, adjust gauge wheels before
operating mower as shown in the O pera-
_on section of this manual.
¢
03042rex
22
Publicidad
