Publicidad
Idiomas disponibles
Idiomas disponibles
Slope S heet
Keys
(I) Oil Drain Tube
Your new tractor has been assembled
at the factory with the exception
of those parts left
unassembled
for sh_pping purposes.
TOOLS REQUIRED
FOR ASSEMBLY
A socket wrench
set will make assembly
easier.
Standard
wrench
sizes are listed.
(1) 1/2" wrench
Tire pressure
gauge
(2) 7/16" wrenches
Utility knife
Phers
When
right or left hand is mentioned
in this
manual, it means whenyouarein
theeperatlng
position (seated behind the steenng wheel).
TO
REMOVE
TRACTOR
FROM
CARTON
UNPACK
CARTON
Remove
all accessible
loose parts and
parts cartons
from carton.
Cut along dotted
lines on all four pan-
els of carton.
Remove end panels and
lay side panels flat.
Check for any additional
loose parts or
cartons
and remove.
BEFORE
REMOVING
TRACTOR
FROM SKID
TO CHECK
BATrERY
1. Lift hood to raised position.
NOTE: If this battery is put into service after
month
and year indicated
on label (label is
located
between
terminals)
charge
battery
for minimum
of one hour at 6-I 0 amps. (See
"BATTERY"
_nMaintenance
section of this
manual for charging
instructions).
For battery and battery cable installation
see
"REPLACING
BATTERY"
in the
"Service and Adjustments"
section in this
manual.
ADJUST
SEAT
1. Sit in seat.
2. Lift up adjustment
lever (A) and slide
seat until a comfortable
position is
reached which allows you to press
clutch/brake
pedal all the way down.
3. Release lever to lock seat in position.
NOTE: You may now roll your tractor off
the skid. Follow the appropriate
nstructlon
below to remove
the tractor from the skid.
_, WARNING:
Before
starting, read, un-
derstand
and follow all instructions
in the
Operation
section of this manual.
Ensure
tractor is in a well-ventilated
area. Ensure
the area in front of tractor Js clear of other
people and objects.
7
Publicidad
