Descargar Imprimir esta página

Alto Professional TMX200DFX Manual De Inicio Rápido página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
8.
HI
EQ
(TREBLE)
Adjusts the high (treble)
frequencies of the channel.
9.
MID EQ – Adjusts the mid-
range frequencies of the
channel.
10.
MID
FREQUENCY
SELECTOR – Adjusts the
frequency band affected
by the MID EQ knob.
11.
LOW
EQ
(BASS)
Adjusts the low (bass)
frequencies of the channel.
12.
AUX
SEND
CHANNEL
VOLUME – Adjusts the
audio level sent from that
channel
to
the
Channel (which is sent out
the
AUX
SENDS
controlled
by
the
SENDS VOLUME knobs).
The top two knobs can
adjust the pre- or post-
fader
levels
determined by the AUX
PRE-/POST-FADER
SWITCH). The bottom two
knobs can adjust the level
of the signal sent to the
mixer's effects processor.
13.
AUX PRE-/POST-FADER
SWITCH
When
button is depressed, the
audio sent to the AUX
SENDS is taken before the
channel's fader. When the
button is raised, the audio
sent to the AUX SENDS is
taken after the channel's
fader.
14.
CHANNEL
PAN
BALANCE – If this knob is
labeled "PAN," it adjusts
the
(mono)
channel's
position in the stereo field.
If the knob is labeled
"BAL,"
it
adjusts
balance between the two
mono channels of that
stereo signal.
15.
CHANNEL MUTE – Press
this button to mute/unmute
the
channel.
channel's audio will only
be sent to its INSERT or
heard in the Solo Channel
when its SOLO button is
depressed.
16.
PFL – When this button is depressed, the pre-fader audio will be heard in the Solo Channel, which will become
the only audio sent to the PHONES outputs and CTRL OUTS. The LED METERS will also display the audio
levels, which are controlled by the PHONES and CTRL ROOM volume knobs.
17.
PEAK LED – The LED will flash if the signal is clipping. If this happens, decrease the setting of the GAIN knob
or CHANNEL FADER.
18.
CHANNEL FADER – Adjusts the audio level on the channel.
19.
2-TRACK INPUTS – You may connect these inputs to the outputs of an external sound source using a
standard stereo RCA cable (sold separately). You can send this channel to the Solo Channel (using the CTRL
ROOM SOURCE "2 TK IN" switch) and/or the main mix (using the 2TK TO MIX switch).
19 20
20
19
Aux
and
AUX
(as
the
/
the
The
21
25
25
24
21
25
25
24
21
22
22
23
22
22
23
21
36
32
32
33
33
36
35
35
34
34
38
38
38
38
38
38
39
40
40
40
40
41
41
41
4
30
29
26
28
30
27
28
37
37
38
42
47
38
42
46
39
40
45
42
44
42
43
40
40
40
41
41
41
31
31
49
48
40
40
41

Publicidad

loading