Alto Professional TMX200DFX Manual De Inicio Rápido página 6

EFFECTS
TO HEAR THE EFFECTS ON A CHANNEL: Use the EFFECTS SELECTOR to choose one of the effects below, adjust the
parameter with the VARIATIONS SELECTOR, then turn up the AUX SEND CHANNEL VOLUME 4 for that channel.
# PRESET
1 VOCAL 1
2 VOCAL 2
3 LARGE HALL
4 SMALL HALL
5 LARGE ROOM
6 SMALL ROOM
7 PLATE
8 TAPE REVERB
9 SPRING REVERB
10 MONO DELAY
11 STEREO DELAY
12 FLANGER
13 CHORUS
14 REVERB+DELAY
15 REVERB+FLANGER Stereo flanger effect with room reverb.
16 REVERB+CHORUS
DESCRIPTION
Reverb, simulating a room with a small delay time.
Reverb, simulating a small space with a slight decay
time.
Reverb, simulating a large acoustic space.
Reverb, simulating the acoustics of a stage space.
Reverb, simulating a studio with many early reflections.
Reverb, simulating a bright studio room.
Simulates bright plate reverb.
Simulates classic tape delay created by multiple
playback heads.
Simulates the lightly stretched sound of spring reverb
from analog transducers.
Reproduces the signal after a small period of time.
Reproduces the signal after a small period of time with a
slight difference between the two stereo channels.
Classic stereo flanging effect, similar to a jet plane
taking off.
Simulates the full, complex, watery sound of several
instruments playing the same thing.
Delay effect with room reverb.
Stereo chorus effect with room reverb.
6
PARAMETER RANGE
Decay time 0.8~1.1s
Pre-delay 0~79ms
Decay time 0.8~2.5s
Pre-delay 0~79ms
Decay time 3.6~5.4s
Pre-delay 23~55ms
Decay time 1.0~2.9s
Pre-delay 20~45ms
Decay time 2.9~4.5s
Pre-delay 23~55ms
Decay time 0.7~2.1s
Pre-delay 20~45ms
Decay time 0.6~6.1s
Pre-delay
Decay time 1.3~5.4
Pre-delay 0~84ms
Decay time 1.3~5.4s
Pre-delay 0~84ms
Delay period 60~650ms
Delay period 210~400ms
Feedback 37~73%
Rate 0.16~2.79Hz
Rate 0.5~5Hz
Delay period 211~375ms
Reverse decay time 1.0~2.9s
Flanger rate
0.16~2.52Hz
Reverse decay time
Chorus rate 0.5~4.74Hz
Reverse decay time 1.5~2.9s
10ms